Waterbeds and Replacement Parts for Waterbeds
Hardside
water mattresses		 Softside
water mattresses		 Heaters Innerspring
Inserts

  What is a Basic Bed?

Replacement Innerspring Mattresses for Wood Frame Waterbeds

Waterbed Insert Mattresses are specially made to fit inside a waterbed frame and allow one inch clearance between the inside of the frame and the mattress.

Waterbed Size Inside Frame Dimensions Insert Mattress  Dimensions
(waterbed frame less 2")
Super Single 48"x  84" 46" x  82"
 Queen 60" x  84" 58" x  82" WB Queen
 King (Cal. King) 72" x  84" 70"x  82" WB King

The following waterbed insert mattresses are available.

Lady Luxury Pillowtop
pictured as regular size		 Super Single $374
WB Queen $443
WB King $580
Dream Dimensions
pictured as regular size		 Super Single $599
WB Queen $639
WB King $795
Sleep Dimensions
pictured as regular size		 Super Single $593
WB Queen $706
WB King $868

 

Replacement Water Mattresses for your Wood Frame Waterbed
Available as King(72"x 84"x 8"), Queen (60"x 84"x 8") and Super Single(48"x 84"x 8")

Free Flow (Full Flotation)
30 seconds of wave motion		 $70 We find that using the time measurement rather than percentage-of-wave reduction is more exact for describing the waveless properties of water mattresses. The 30-second wave motion for a free flow was our measurement for a king size. The smaller sizes will stop quicker than a king. A free flow water mattress that is overfilled to the point where there is no extra material will stop sooner than a properly filled water mattress.

Reduced Motion
6-8 seconds of wave motion

 $130
Waveless
2 seconds of wave motion		 $240
Ultra-Waveless Firm
less than one second		 $350
Ultra-Waveless Soft with Lumbar
less than one second		 $529

 

All Waterbed Mattresses have a  manufacturer's limited liability warranty. This type of warranty covers defects as defined by the manufacturer. The most common defect is a seam failure. The cost of labor, shipping and handling is not covered by the manufacturer's warranty.

Replacement Water Mattress for your Softside

   If you are replacing your Water Mattress for your softside, the chances are very good that the exact model you purchased is no longer being manufactured.  Therefore, you will have to measure the inside cavity of your softside and call us to discuss the best fit.  The following are examples of common replacements.

Tube and Tube Set (cylinder) for your Somma type Softside

Full Motion (plain) Queen Set
 		 $150 Q/K tube $25
Full Set
 		 $125 T/F tube $25
Waveless (foam fill) King Set
 		 $220 K/Q $35
Queen Set
 		 $195

Water Mattress for your Heated Softside

Slant side 8" fill  

3 Layer
 

 $221
 

6 Layer Dual
 

 $425

All Waterbed Mattresses have a five year manufacturer's limited liability warranty. This type of warranty covers defects as defined by the manufacturer. The most common defect is a seam failure. The cost of labor, shipping and handling is not covered by the manufacturer's warranty.

 

Replacement Heater for your Wood Frame Waterbed
 Heaters for your Wood Frame are insulated flat grids that consume between 110-350 watts of electricity.
When the bed is properly cover with comfortors the heater will draw power for approximately 25% of the time.
Normal settings should be between 85-90 degrees Fahrenheit.
All modern waterbed heaters have been redesigned to eliminate EMF. 

Technical data, Heating element
 
Type: SOFTSIDE HARDSIDE
Rating: 170 W 285 W
Dimension: 11.8x24 “ 11.8x24 “
Temperature control: Electronic
Power supply: 120 V AC, 60 Hz
Heating circuit: Etched Copper foil. US Patent No. 4,908,497
Element insulation: Double insulated, with an outer sheath of water tight, Polyester tested to UL 1445 by independent test authority.
Power Cord : Integrally moulded. Watertight. Tested for tensile strength.
Over heat protection: Automatic protector incorporated in the element.
Cord length: 5.9 ft + 4.9 ft
Warranty: 5 years limited prorated.
Thermostat  
Temperature control: Electronic thermostat with Thermistor transducer.
Enclosure Material: Fire resistant plastic.
Temperature range: 70 - 100 ºF
Temperature variation at PVC mattress: Electronic thermostat ± 1ºF at normal comfort room temperature.
Basic Heater and Control
bulb and capillary. accurate to +or-1.5 degree.
resistant to electrical power surges and spikes  $75

The six essential parts of a Complete Wood Frame Waterbed are:

1. Water Mattress






2. Safety Liner





3. Heater w/control






4. Frame






5. Deck




6..Pedestal.